High-quality components, good kit. Shipping took about 10 days to the US. Overall everything looks good

My holy grail of switches has been to find something with the profile of the chicklet keys on my ThinkPad X1 (very resistant early, firm early bump, not a freefall after), but with a better overall feel. While I haven't got them in a board yet, these switches feel pretty darn close. So, if you're looking for an MX switch with that feel, give these a go. If you want a low profile switch, the Sunset Tactile Chocs are awesome too.

The folks at Keebd were also great with support too so you should definitely buy them here.

My holy grail of switches has been to find something with the profile of the chicklet keys on my ThinkPad X1 (very resistant early, firm early bump, not a freefall after), but with a better overall feel. While I haven't got them in a board yet, these switches feel the closest I've found yet. Got the Baby Kangaroos at the same time, and they fit the bill pretty well too, so if you're looking for a litre profile switch with that feel, give these a go.

The folks at Keebd were also great with support too so you should definitely buy them here.

Everything works well out of the box so to speak. Only issue is the num and scroll lock lights are reversed as shipped

I must admit to having been somewhat dubious about how well this fume extractor would work considering its very small size, but I am pleasantly surprised as it works really well on removing fumes from floating up into your face while soldering say using a microscope, as I am doing. The slow speed still works up to at least 50mm away, while the fast speed easily works up to 100mm and beyond. There is obviously no filter, but if you are in a fairly open space that should not be a problem.

Perfect length for the corne

Fun build, looks good. Build guide a teency bit lacking and qmk firmware seems to be created by Satan himself, but the community is great so that helps. LEDs were easier to solder then I thought they would be.

No more 10ft long coiled P/S2 cable! This upgrade is a drop in replacement for the original board. The only downside is that the right side of the board doesn't have anything to hold it down, so I had to some some double sided tape. My scroll lock and numpad LEDs are reversed, but otherwise no major issues.

This board is a good intermediary board or introductory board to split keyboards. From regular keyboards, I went to a pre-built 40%, then to this. Eventually, I'll probably move onto a low profile split keyboard with splays and column stagger which is why this is an intermediary board.

This board does have some problems. Due to the shortage of ProMicros, you'd have to recompile firmware for whatever microcontroller you picked up. The Helios that is sold here is really good for that and there are converters in the QMK repository.

Second, the guide is basically in Japanese. It's not too bad cause the pictures are very self-explanatory, but I wanted to mention that.

LEDs are hard to solder. This is just a general note. Any board with LEDs will face this issue. Make sure you have a good soldering iron that can regulate its temperature, good solder, and flux.

Once you've built the board, it's great! I made it work with VIAL so I don't have to reflash the firmware all the time and also so the board can be plugged in either side. Because it has the full 40 keys, you can play around with different setups. I was able to go from 40 to 36 keys and I can always add or remove keys quite easily. It's also very easy to mod. You can add 90 degree extenders, some phone stands on the bottom to tent the board, and cool keycaps.

Works as intended, pretty easy to install, wish it was usb c instead of usb b but the adapter I bought gets the job done, overall very nice wish I had done this sooner!

Im running these on a Piantor split ergo mech. If you like a tactile and you like choc these are the way to go. Very satisfying to type on. Received them promptly

Typed this review on this keyboard.

Giving my 1986 Model M (no indicator LEDs) some new life. 3d printed part is nicely done. For the 16+8 ribbon connectors, ensure the 8-pin connector is aligned with the left side of the connector, where it says "rows".

I was little concerned ordering from this site seeing how there isn't many reviews. Throughout the site. However, came completely as advertised. They even shipped it out of the facility within the same day I ordered my kit. Very impressed by that. It does sit high and very flat when using the base board. Would recommend arm rest. I 3D printed a bottom plate to put mine on an angle and lower to the table.

They are really tight in my choc reds and sunsets. The white ones are less tight. This might be a positive for portability, but be careful.